These lights
have been used to help
NASA during the launch of the space shuttle, so they
could study ice crystal formations on the fuel tanks at
launch !
Under H-2-0 Lights
For Question Contact Bert At
813-493-0493
Installation
6" to 48" below water line (lenses tested to
depth of 300ft) Spacing between lights is 6ft to
8ft
H-2-0 35 watt Xenon Bulb
Best
Mounting surface: fiberglass hull
Replacing
bulb can be done from with in vessel
Lumens:
3,600
Light
Life Approx. 6000+ hours
Lens
type: Borosilicate glass lens is 0.5"/15mm
Housing
is Navel bronze
Power
Supply: for this light is 12 volt start up
current 18 amps for about 25 second & 3.5
amps continuous
Retail
$900.00 - Buy it now $585.00
Plus
Shipping and Handling
H-2-0 50 watt Xenon bulb
Best Mounting
surface: fiberglass hull
Replacing
bulb can be done from with in vessel
Bulb used: 50
watt Xenon bulb
Lumens: 5,400
Light Life
Approx. 6000+ hours
Lens type:
Borosilicate glass
Power Supply
for this light is 12 volt start up current 18
amp for about 25 second & 3.5 amps continuous
Installation
6" to 48" below water line (lenses
tested to a
depth of 300ft) Spacing between lights is 6ft to
8ft
Retail
$1,250.00 - Buy it Now $812.00
Plus Shipping
and Handling
H-2-0 175 watt metal
halide bulb
Lumens:
27,000
Light Life:
Approx. 6000+ hours
Replacing
bulb can be done from with in vessel
Lens Type
Borosilicate glass lens is 0.5' thick
Housing is
Naval Bronze
Power Supply
requirements dual ballast 120 (1 phase): 240 (1
phase): 280 (3 phase) volt, Running current
1.5-0.75 amps
Cabling
length of cable to ballast must not exceed 40ft
15ft supplied; Custom length available
Installation
12" to 48" below water line (lenses tested to a
depth of 300ft) Spacing between lights is 5ft to
8ft
Retail
$2,100.00 - Buy NOW $1,365.00
Plus Shipping
and Handling
H-2-0 AL600
Blaster
Lumens:
160,000
Bulb used 600
watt Metal Halida bulb
Replacing
bulb can be done from with in vessel
Light life
approx. 6000+ hours
Lens type
borosilicate glass lens is 0.6" / 15mm thick
Housing naval
bronze
Power Supply
requirements dual ballast 120 (1 phase): 240 (1
phase): 280 (3 phase) volt, Running current
1.5 - 0.75 amps
Cabling
length of cable to ballast must not exceed 40ft
15ft supplied; Custom length available
Installation
6" to 48" below water line (lenses tested to a
depth of 300ft) Spacing between lights is 6ft to
8ft
Retail
$3,750.00 - Buy it NOW $3,450.00
Plus Shipping
and Handling
H-2-0 35H Nano
blaster
Bulb used
35 - watt metal halogen
Best
Mounting surface: fiberglass hull
Replacing
bulb can be done from with in vessel
Lumens:
550
Light
Life Approx. 900+ hours
Lens
type: Borosilicate glass lens
Housing
is Navel bronze
Power
Supply: for this light is 12 volt
Cabling
10ft
Installation 12" to 48" below water line
(Lenses tested to a depth of 300ft)
Under H-2-0 Lights
